• 纯胶膜 Bonding Sheet

    产品特点:
    优异的剥离强度                        
    优异的耐化性                            
    优良的电性能                            
    优良的耐热性  
     
    Feature:
    Excellent peel strength
    Excellent chemical resistance
    Good electrical property
    Good thermal shock
     
    产品特性(FCCL Characteristic):
    特性
    property
    单位
    Unit
    条件
    Condition
    标准
    Standard
    ABXSXX15XX ABXSXX25XX 测试方法
    Test method
    Release Film
    Adhesive
    Release Film
    Peel Strength Kgf/cm
    (90?)
    normal H mil≧0.8
    1 mil≧1.0
    1.4~1.7 1.5~1.9 IPC-TM-650 2.4.9
    Solder Float Resistance --- 270℃/10sec No Change Appearance Pass Pass IPC-TM-650 2.4.13
    Chemical Resistance % NaOH ≦20 2~4 2~4 IPC-TM-650 2.3.2
    % HCI 3~5 3~5
    % IPA 1~3 1~3
    Volatile Content % 150℃/30min ≦2 0.5~0.7 0.6~0.9 IPC-TM-650-2.3.37
    Moisture Absorption % D-24/23 ≦6.0 2.4~2.8 IPC-TM-650 2.6.2
    Resin Flow mm A ≦0.15 0.11~0.13 IPC-TM-650-2.3.17.1
    Note:1. Data shown above are nominal values for reference only,Details see Certification of Quality
      2. Storage Condition:Vacuum Packaging: Below 25℃ for 6 months,
    Normal Packaging : Below 25℃,below 70% RH for  6 months.

    n快压参数(Fast Lamination)
    ² 预压时间:10sec
    ² 成型时间:80~120sec
    ² 压合温度:180°C
    ² 压合压力:100~120kgf

    ² Press Free Time:10sec
    ² Press Time:80~120sec
    ² Lam Temp:180°C
    ² Pressure:100~120kgf
    十分快3